if you are posting a pic in your signature here is the way you need to type in the new code...
NO HTML codes pleeeaase!!

ok where as you were used to the whole img src code...here is the proper way to use the PGD coding.

we use the squared parenthesis [ ] and not the arrows < >

you will need to insert your own address which you can get from right clicking on an image and choosing properties.
You will type ONLY what is in bold print. I couldn' t type it all out as needed or the image would have shown up instead of the coding.

the address listed is for one of my own images...you will need to obtain the address for the image you want to use.

type[IMG]then the address http://ourworld.cs.com/Cardlady332/emaillady.gifthen a final [/IMG]

If you want to upload a pic you have saved on your hard disk...start or reply to a post...type test (or whatever) in the text box and then at the bottom of the post there is the option to upload a picture...click on that...
and a small box will pop up...
click on browse and locate the pic on your computer and double click on it..
then hit ok..
it will tell you if the image upload was succesful or not... as long as the file is not too large it should work out fine..
also click the box next to the upload option where it says embed picture in post...this will allow you to see what the picture will look like..
then hit preview (to preview it...duh) or hit ok and it will be posted.
once it is posted there will be a file name at the bottom of your post wth a small paper clip symbol next to it.. click on that and a new box will pop up with your picture in it...the address for this picture will appear at the top of the frame...either copy it down or highlight and paste it from your main internet address GO box at the top of your browser screen... it appears n 2 places but will only let you highlight and paste it from one.

Hope this helps!!!

And then there is me, Pat!
I' ve got the signature, but not the avatar!
I' ll have to work on this later!